User's Manual Part 1

BTS Equipment Identification – continued

PRELIMINARY

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

MAY 2004

1-24

Shelf Device ID Numbers for

Stand–Alone

All cards/modules/boards in the BTS at a single site assigned to a single

BTS are also identified with unique Device ID numbers. Refer to

Table 1-6 for the Device ID Numbers. Reference Figure 1-6 or

Figure 9-2 for the layout of the shelf.

Table 1-6: Shelf Device ID Numbers

BTS # PS1 CSA GLI MCC BBX cMPC

1 1 1 1 1 2 3 1 4 –

Figure 1-6: CCP2 Shelf Layout

ti–cdma–wp–00310–v01–ildoc–ah

STA/ALM

SYNC MONITOR

FREQ. MONITOR

MMI

When used, the MCC–DO

is seated in MCC slots 1

and 2. MCC slot 3 can be

an MCC–1X or a filler

panel.

The following is a list of the cards/modules in CCP 2 Shelf and a brief

description.

1. Power Supply Module

2. CSA