User's Manual Part 1

Required Documents
MAY 2004
1-5
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
PRELIMINARY
Installation
The following documents are required to perform the installation, ATP
and FRU procedures of the cell site equipment:
S SCt480 BTS Hardware Installation, Optimization/ATP and FRU –
68P09260A11 (This manual)
S Standards and Guidelines for Communication Sites
– Hard copy (Motorola Part Number 6881089E50–A)
– CD–ROM (Motorola Part Number 9882904Y01)
S Grounding Guidelines for Cellular Radio Installations
(Motorola part number 68P81150E62) or
– Appendix C of Standards and Guidelines for Communication Sites
S Site Document (generated by Motorola Systems Engineering), which
includes:
– site specific documentation
– channel allocation
– contact list (customer)
– ancillary/expendable equipment list
– site wiring lists
– contact list (Motorola support)
– job box inventory
S Demarcation Document (Scope of Work agreement)
S Installation manuals for non-Motorola equipment (for reference
purposes).
Abbreviations and acronyms
Table 1–1 contains a list of the abbreviations and acronyms used in this
manual.
Table 1-1: Abbreviations and Acronyms
Acronym Description
ACT Active
ALM Alarm
ATP Acceptance Test Procedure
AUX Auxiliary
BLO Bay Level Offset
BSS Base Station System
BTS Base Transceiver Station or Subsystem
BBX Broad Band Transceiver
table continued on next page
1