User's Manual Part 1

List of Tables – continued
xx 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU MAY 2004
PRELIMINARY
Table A-3: Procedure to Test MCC–DO Pilot Time Offset A-6 . . . . . . . . . . . . . . . .
Table A-4: Procedure to Test MCC–DO Rho A-8 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-5: Procedure to Test MCC–DO Packet Error Rate A-10 . . . . . . . . . . . . . . . .
Table B-1: Set IP Address on Agilent E7495A test set B-2 . . . . . . . . . . . . . . . . . . .
Table B-2: Detecting Agilent E7495A Test Equipment B-3 . . . . . . . . . . . . . . . . . . .
Table B-3: E7495A Power Sensor Calibration B-3 . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-4: Verify and Change Agilent E4406A GPIB Address B-5 . . . . . . . . . . . . .
Table B-5: Verify and Change Agilent E4432B GPIB Address B-7 . . . . . . . . . . . . .
Table B-6: Verify and Change Advantest R3267 GPIB Address B-8 . . . . . . . . . . . .
Table B-7: Verify and/or Change Agilent 8935 (formerly HP 8935)
GPIB Address B-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-8: Verify and/or Change HP 8921A and HP 83236A
GPIB Addresses B-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-9: Verify and/or Change Advantest R3465 GPIB Address B-12 . . . . . . . . . .
Table B-10: Verify and/or Change Motorola CyberTest GPIB Address B-13 . . . . . .
Table B-11: Verify and/or Change HP 437 Power Meter GPIB Address B-14 . . . . . .
Table B-12: Verify and/or Change Gigatronics 8541C Power Meter
GPIB Address B-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-13: HP 8921A/600 Communications Test Set Rear Panel
Connections Without Rubidium Reference B-17 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-14: HP 8921A/600 Communications Test Set Rear Panel
Connections With Rubidium Reference B-19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-15: System Connectivity B-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-16: Pretest Setup for HP 8921A B-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-17: Pretest Setup for Agilent 8935 B-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-18: Advantest R3465 Clock Setup B-24 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-19: Pretest Setup for Advantest R3465 B-25 . . . . . . . . . . . . . . . . . . . . . . . . .
Table B-20: Perform Agilent E4406A Self–alignment (Calibration) B-28 . . . . . . . . .
Table B-21: HP 437 Power Meter Calibration Procedure B-29 . . . . . . . . . . . . . . . . .
Table B-22: Calibrate Gigatronics 8541C Power Meter B-31 . . . . . . . . . . . . . . . . . . .
Table B-23: Calibrating Test Cable Setup (using the HP PCS Interface) B-32 . . . . .
Table B-24: Procedure for Calibrating Test Cable Setup Using Advantest
R3465 B-36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table C-1: Download ROM and RAM Code to Devices C-2 . . . . . . . . . . . . . . . . . .
Table D-1: Parts Required to Fabricate MMI Cable D-1 . . . . . . . . . . . . . . . . . . . . . .
Table D-2: Fabricated MMI Cable Wire Run List D-2 . . . . . . . . . . . . . . . . . . . . . . .
Table E-1: Combiner and Directional Coupler Specifications E-1 . . . . . . . . . . . . . .
Table E-2: Procedure for Installing Expansion Compact BTS with Dual
cCLPA E-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .