User's Manual Part 1

Customer Input / Output Cables
PRELIMINARY
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
MAY 2004
4-74
Introduction
The objective of this procedure is to attach the ferrite core onto the
customer input and output cables.
Cable Descriptions and Part
Numbers
Table 4-38 gives the cable descriptions and part numbers used to install
the Customer I/O connectors.
Table 4-38: Cable Descriptions and Part Numbers
Cable Qty. Part Number Description
E 1 Customer
Supplied
Customer Input/Output cable, 0–8 conductor, 18–24 AWG, stranded
wire
4 Molex, terminal
plugs, P/N
39352–0106
Connector, 6 pin
2 Molex, terminal
plugs, P/N
39352–0108
Connector, 8 pin
3 Motorola P/N
7687717T02
Core, Ferrite
1–3 Customer
Supplied
Tie–wrap
Customer Input and Output
Connector Pinouts
Input Pinouts
Table 4-39 lists the pinouts for the Customer Input connectors.
Table 4-39: Customer Input Connector Pinouts
Pin Number Description
1 Customer Input 1/5
2 Customer Input 1/5 Return
3 Customer Input 2/6
4 Customer Input 2/6 Return
5 Customer Input 3/7
6 Customer Input 3/7 Return
table continued on next page
4