User's Manual Part 1

Power Distribution Enclosure Installation – continued

PRELIMINARY

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

MAY 2004

4-36

Materials

Tools

The following tools are required to install the PDE:

S Torque Screwdriver

S Drill, 3/8–inch or 1/2–inch drive

S Appropriate concrete or wood drill Bits

S Tie–wraps

S Alarms connector, 8–pin in–line, (Tyco, part number 103958–7)

customer supplied

S Bucklestrap Cutting Tool (Motorola P/N 6604809N01) for pole

mounting bracket assembly

PDE Installation

Figure 4-25 shows the Wall Mounting Bracket. and Mounting Bracket

Assembly.

Slots for hangging the TME

Isolation

Pad

Isolation

Washer

Shoulder

Washer

M6 Screw

Pole

Mounting

Straps

Pole Rest

Figure 4-25: Wall Mounting Bracket and Pole Mounting Bracket Assembly

ti–cdma–wp–00317–v01–ildoc–ah