User's Manual Part 1

List of Tables – continued
MAY 2004 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU xiii
PRELIMINARY
Table 4-2: Procedure to Attach BTS Mounting Bracket 4-7 . . . . . . . . . . . . . . . . . .
Table 4-3: Procedure to Attach BTS to Mounting Plate 4-8 . . . . . . . . . . . . . . . . . . .
Table 4-4: DC Input Cable Description and Part Number 4-10 . . . . . . . . . . . . . . . . .
Table 4-5: Procedure to Mount the Power Amplifier 4-11 . . . . . . . . . . . . . . . . . . . . .
Table 4-6: Ground Cable and Lug Description and Part Number 4-12 . . . . . . . . . . .
Table 4-7: Procedure to Ground the cCLPA 4-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-8: Procedure to Attach DC Power Cable to the cCLPA 4-14 . . . . . . . . . . . .
Table 4-9: Data Cable Description and Part Number 4-16 . . . . . . . . . . . . . . . . . . . . .
Table 4-10: Data Cable Wiring Scheme 4-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-11: Procedure to Attach BTS Data Cable to cCLPA 4-17 . . . . . . . . . . . . . . .
Table 4-12: Procedure to Pole or Wall Mount the cCLPA 4-19 . . . . . . . . . . . . . . . . .
Table 4-13: TME Conduit Sizes 4-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-14: Procedure to Pole Mount the TME 4-24 . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-15: Procedure to Install Mounting Bracket on a Wall 4-26 . . . . . . . . . . . . . .
Table 4-16: Procedure to Install Compact BTS in a TME 4-28 . . . . . . . . . . . . . . . . .
Table 4-17: Procedure to Install the HMS 4-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-18: Conduit Sizes 4-33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-19: Procedure to Install Mounting Bracket Assembly on a Pole 4-37 . . . . .
Table 4-20: Procedure to Install the Wall Mounting Bracket on a Wall 4-38 . . . . . . .
Table 4-21: Procedure to Install the Heat Exchanger 4-40 . . . . . . . . . . . . . . . . . . . . .
Table 4-22: PDE Punchblock Wiring Descriptions 4-41 . . . . . . . . . . . . . . . . . . . . . .
Table 4-23: Ground Cable and Lug Description and Part Number 4-46 . . . . . . . . . .
Table 4-24: Procedure to Attach the Earth Ground Cable 4-47 . . . . . . . . . . . . . . . . .
Table 4-25: Procedure to Ground an Outdoor Site 4-49 . . . . . . . . . . . . . . . . . . . . . .
Table 4-26: DC Input Cable Description and Part Number 4-53 . . . . . . . . . . . . . . . .
Table 4-27: Procedure to Connect DC Power to the BTS 4-53 . . . . . . . . . . . . . . . . .
Table 4-28: Procedure to Connect DC Power to the BTS 4-55 . . . . . . . . . . . . . . . . .
Table 4-29: AC Input Cable Description and Part Number 4-57 . . . . . . . . . . . . . . . .
Table 4-30: Cable Descriptions and Part Numbers 4-59 . . . . . . . . . . . . . . . . . . . . . . .
Table 4-31: Procedure to Install Antenna Cables 4-59 . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-32: List of Required Cables 4-63 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-33: Pin/Signal Information for Span Cable 4-65 . . . . . . . . . . . . . . . . . . . . . .
Table 4-34: Procedure to Install 1X or DO Span Cable 4-65 . . . . . . . . . . . . . . . . . . .
Table 4-35: Pinout for Cables C and C1 4-66 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-36: Procedure for Installing the RGPS Head and Cabling 4-67 . . . . . . . . . .
Table 4-37: Procedure for Installing RF–GPS Antenna and Cabling 4-70 . . . . . . . . .
Table 4-38: Cable Descriptions and Part Numbers 4-74 . . . . . . . . . . . . . . . . . . . . . . .