User's Manual Part 1

Attaching BTS to Mounting Rack – continued

PRELIMINARY

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

MAY 2004

4-8

BTS to Mounting Plate

Perform the procedure in Table 4-3 to attach the BTS to the Mounting

Plate.

Table 4-3: Procedure to Attach BTS to Mounting Plate

Step Action

NOTE

The Compact BTS weighs 12 Kg (22 lbs).

1 Place BTS on Mounting Plate as indicated in Figure 4-5. BTS bracket holes align with rack holes.

2 Secure BTS bracket to rack using two (2) customer supplied screws. Torque screws to manufacturer’s

specification.

3 At the rear of the BTS, use one M6 screw and isolation washer to secure the BTS to the mounting

plate. Torque screw to 5 N–M (44 in–lbs).

ti–cdma–wp–00303–v01–ildoc–ah

Figure 4-5: Attaching BTS to Mounting Plate

Two (2) rack screws are

required for attaching

BTS to rack.

One (1) M6 screw and

isolation washer is

required to attach BTS

to rack. See Figure 4-6.