User's Manual Part 1

Attaching BTS to Mounting Rack – continued

PRELIMINARY

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

MAY 2004

4-6

Procedure to Attach Mounting

Plate to Rack

Follow the procedure in Table 4-1 to attach the Mounting Plate to the

Rack. Refer to Figure 4-3.

Table 4-1: Procedure to Attach Mounting Plate to Rack

Step Action

1 Determine where in the rack the Mounting Plate is to be attached.

2 Ensure that the mounting plate is level.

3 Set Mounting Plate similar to what is shown in Figure 4-3.

Attach Mounting Plate to Rack using four (4) customer supplied rack screws. Torque screws to

manufacturer’s specifications.

ti–cdma–wp–00301–v01–ildoc–ah

Figure 4-3: Attaching Mounting Plate to Rack

Four (4) rack screws

are required for

attching mounting plate

to rack. Two per side.