User's Manual Part 1

Span Line and RGPS Cabling

MAY 2004

3-7

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

PRELIMINARY

Cable Labels

The cable designations are referenced to Table 3-1 in the “Cable

Description” area of this chapter.

Required Tools and Materials

Table 3-4 provides the quantities and descriptions of the cables.

Table 3-4: Cables Needed for Span/RGPS Connections

Cable Qty. Part Number Description

C 1 T472AA RGPS cable, 15 m (50 ft.)

T472AB RGPS cable, 38 m (125 ft.)

T472AC RGPS cable, 76 m (250 ft.)

T472AD RGPS cable, 152 m (500 ft.)

T472AE RGPS cable, 304 m (1000 ft.)

T472AF RGPS cable, 608 m (2000 ft.)

C1 1 3086433H07 Punchblock to CBIO Board, 15 pin D–connector on one end and

loose wires on the other end.

D 1–3 Customer Supplied Span cable, 4 or 8 conductors, 24–28 AWG stranded, twisted pair

1 –4* 7687717T02 Ferrite, clip–on core

* One Ferrite bead per cable.

Cable Pin and Signal

Information for Span Cabling

Table 3-5 gives the pin and signal information for the Span cable.