Instruction Manual

Generate an ATP Report
DRAFT
SC4812ET BTS Optimization/ATP — CDMA LMF
Apr 2001
4-12
Background
Each time an ATP test is run, an ATP report is updated to include the
results of the most recent ATP tests if the Save Results button is used to
close the status report window. The ATP report will not be updated if the
status reports window is closed with use of the Dismiss button.
ATP Report
A separate report is created for each BTS and includes the following for
each test:
 Test name
 BBX number
 Channel number
 Carrier number
 Sector number
 Upper test limit
 Lower test limit
 Test result
 PASS or FAIL
 Description information (if applicable)
 Time stamp
 Details/Warning information (if applicable)
Follow the procedures in the Table 4-2 to view and create a printable file
for the ATP report of a BTS.
Table 4-2: Generate an ATP Report
Step Action
1 Click on the Login tab if it is not in the forefront.
2 Select the desired BTS from the Available Base Stations pick list.
3 Click on the Report button.
4 Sort the report if desired by clicking on a column heading.
5 Click on the Dismiss button if you do not want to create a printable file copy.
6 To create a printable file, select the desired file type in the picklist and then click on the Save button.
4