User's Manual

Updating Calibration Data Files68P64115A18–1
Mar 2003
1X SC 4812T Lite BTS Optimization/ATP Software Release R2.16.1.x
DRAFT
5-3
Table 5-2: Copying CAL Files from Diskette to the CBSC
Step Action
9a – Type the following command:
dos2unix /floppy/no_name/bts–#.cal bts–#.cal
Where: # = BTS number for which the CAL file was created
9b
– Press the Enter key.
NOTE
Other versions of Unix do not support the dos2unix command. In these cases, use the Unix cp
(copy) command. The copied files will contain DOS line feed characters which must be edited out
with a Unix text editor.
10 Type in ls –l *.cal and press the Enter key. Verify the CAL files have been copied.
– Verify all CAL files to be transferred appear in the displayed listing.
11 Type eject, and press the Enter key.
12 Remove the diskette from the workstation.
5