User's Manual
Test Equipment Inter–unit Connection, Testing, and Control68P64115A18–1
Mar 2003
1X SC 4812T Lite BTS Optimization/ATP Software Release R2.16.1.x
DRAFT
F-19
Pretest Setup for Agilent 8935
Before the Agilent 8935 analyzer is used for LMF controlled testing it
must be set up correctly for automatic testing.
Table F-14: Pretest Setup for Agilent 8935
Step Action
1 Unplug the memory card if it is plugged in.
2 Press the Shift button and then press the I/O Config button.
3 Press the Push to Select knob.
4 Position the cursor at IO CONFIG and select it.
5 Select Mode and set for Talk&Lstn.
F