User's Manual

Alarm / Span Cabling
68P64115A19–4
Mar 2003
1X SC 4812T-MC BTS Hardware Installation - Software Release R2.16.1.x
CONTROLLED INTRODUCTION
2-18
Table 2-10: Pin and Signal Information for ALARM B Connectors
Pin Wire Color Signal Name Pin Wire Color Signal Name
1 BLU/WHT B CDO9 NC 16 RED/GRN B CDO14 NC
2 WHT/BLU B CDO9 COM 17 BRN/RED B CDO14 COM
3 ORG/WHT B CDO9 NO 18 RED/BRN B CDO14 NO
4 WHT/ORG B CDO10 NC 19 SLT/RED B CDO15 NC
5 GRN/WHT B CDO10 COM 20 RED/SLT B CDO15 COM
6 WHT/GRN B CDO10 NO 21 BLU/BLK B CDO15 NO
7 BRN/WHT B CDO11 NC 22 BLK/BLU B CDO16 NC
8 WHT/BRN B CDO11 COM 23 ORG/BLK B CDO16 COM
9 SLT/WHT B CDO11 NO 24 BLK/ORG B CDO16 NO
10 WHT/SLT B CDO12 NC 25 GRN/BLK B CDI 19
11 BLU/RED B CDO12 COM 26 BLK/GRN Cust Retn 19
12 RED/BLU B CDO12 NO 27 BRN/BLK B CDI 20
13 ORG/RED B CDO13 NC 28 BLK/BRN Cust Retn 20
14 RED/ORG B CDO13 COM 29 Power Supply Module Alarm*
15 GRN/RED B CDO13 NO 30 Power Supply Module Alarm Return*
Pin Wire Color Signal Name Pin Wire Color Signal Name
31 BLU/YEL B CDI 22 46 VIO/GRN CUST RTRM 29
32 YEL/BLU CUST RTRN 22 47 BRN/VIO B CDI 30
33 ORG/YEL B CDI 23 48 VIO/BRN CUST RTRM 30
34 YEL/ORG CUST RTRN 23 49 SLT/VIO B CDI 31
35 GRN/YEL B CDI 24 50 VIO/SLT CUST RTRM 31
36 YEL/GRN CUST RTRN 24 51 RED/WHT B CDI 32
37 BRN/YEL B CDI 25 52 WHT/RED CUST RTRM 32
38 YEL/BRN CUST RTRN 25 53 BLK/WHT B CDI 33
39 SLT/YEL B CDI 26 54 WHT/BLK CUST RTRM 33
40 YEL/SLT CUST RTRN 26 55 YEL/WHT B CDI 34
41 BLU/VIO B CDI 27 56 WHT/YEL CUST RTRM 34
42 VIO/BLU CUST RTRN 27 57 VIO/WHT B CDI 35
43 ORG/VIO B CDI 28 58 WHT/VIO CUST RTRM 35
44 VIO/ORG CUST RTRN 28 59 BLK/RED B CDI 36
45 GRN/VIO B CDI 29 60 RED/BLK CUST RTRM 36
NC – normally closed, NO – normally open, Com – common, CDO – Customer Defined Output,
CDI – Customer Defined Input
All Cust Rtrm 19–36 are electronically tied together at the RFMF.
The A CDI numbering is from the LMF/OMCR/CBSC perspective. LMF/OMCR/CBSC starts the numbering at 19 (giving
19 – 36). Actual cable hardware starts the numbering at 0 (giving 0–17)
*CAUTION
Reserved for PSM Alarm signal (–48V application ONLY). DO NOT use these pins for CDOs or CDIs.
2