User's Manual

Manual Overview, Abbreviations and Acronyms
68P64115A19–4
Mar 2003
1X SC 4812T-MC BTS Hardware Installation - Software Release R2.16.1.x
CONTROLLED INTRODUCTION
1-2
Manual Overview, Abbreviations and Acronyms
Manual Overview
NOTE
This document supports Software Version Release 16.1.
The SC 4812T-MC Base Transceiver Station can be a stand alone BTS,
or can be co-located with an SC 4812T for use as an expansion frame. In
a single stand alone configuration, the SC4812T-MC system is capable
of supporting a maximum of 4 carriers in 3-sector configuration or 2
carriers in 6-sector configuration. With the addition of one expansion
frame, the maximum carrier capacity becomes 8 in a 3-sector
configuration or 4 in a 6-sector configuration.
This document provides information pertaining to the specific hardware
and cable installation of the Motorola 1X SCt4812T–MC BTS
Multicarrier frame.
The basic frame installation procedure is described in the SC Product
Family Frame Mounting Guide – 68P09226A18. For detailed
installation information on non-Motorola equipment, refer to the vendor
manuals provided with such equipment.
Manual Structure
Chapter 1 – Overview
This chapter provides the following information:
S Overview of manual content (including Abbreviations and Acronyms)
S Required documents
S Site layout
S Frame Identification
Chapter 2 – Inter-frame Cabling
This chapter contains procedures for cabling the BTS frame
configuration and cabling instruction for optional equipment.
Chapter 3 – Expansion Frame Cabling
This chapter contains procedures for cabling the Expansion frame
associated with the configuration of the BTS.
Chapter 4 – Optional Equipment
This chapter provides identification of optional BTS equipment and the
procedures to install the equipment.
Chapter 5 – What’s Next and Cleanup
This chapter includes site cleanup and a pre-optimization checklist.
Appendix A – Carrier Add
Provides detailed instructions for installing one or more additional
carriers to a BTS frame.
1