User's Manual

Index
68P64115A19–4
1X SC 4812T-MC BTS Hardware Installation - Software Release R2.16.1.x
CONTROLLED INTRODUCTION
Mar 2003
Index-4
Power Alarms Card (PAC), 2-13
Power distribution cabling diagram for systems with
one power feed, 2-44
Power distribution cabling diagram for systems with
two power feeds, 2-45
Power Distribution Cage MC Configuration, 1-10
Power Distribution shelf PDS, 1-9
Pre–connection checklist, 2-47
PSM, 1-4
PSTN, 1-4
PWM, 1-4
Q
QPSK, 1-4
R
Remote GPS (RGD) expansion procedure, 3-12
Remote GPS Distribution (RGD) Board, 3-7
Remote GPS Distribution (RGD) Card, 2-6
Remove debris, 5-3
Required Documentation, 1-5
Revision History, xvii
RF GPS Cabling Diagram, 2-20
RF GPS Cabling Installation Procedure, 2-21
RF Interfaces, 4-4
RF RGPS Expansion Installation Considerations,
3-10
RFDS, 1-4
RFDS , 4-4
RGD, 1-4
RGD Board Cable connections, 3-7
RGPS Cabling Diagrams, 2-22
RSSI, 1-4
RX Antenna Configuration, 2-26
S
SC4812T–MC Expansion Frame I/O Plate, 2-4
SCAP, 1-4
Setting Frame C–CCP Shelf Configuration Switch,
3-16
Site Document , 1-5
Site I/O, 1-9
Site I/O and Span I/O Boards, 2-6
Span I/O, 1-9
Span I/O board (A) installation, 2-12
Span I/O board (B) installation, 2-12
Span line cable pin numbering, 2-14
Specifications, 1-6
System to Feed Multiple BTSs from One GPS
Antenna, 3-11
T
TCH, 1-4
Timing Sources, 2-19
Tools, 5-3
Tools and equipment required, 2-46
Top Interconnect Plate, 2-3
TSI, 1-4
TX antenna; –48 V configuration, 2-27
W
What’s Next, 5-2