User's Manual

Index
68P64115A19–4
1X SC 4812T-MC BTS Hardware Installation - Software Release R2.16.1.x
CONTROLLED INTRODUCTION
Mar 2003
Index-2
Numbers
120 Degree Sector Receive Path Cabling, 2-31, 2-37,
4-10, 4-15
120 Degree Sector Transmit Path Cabling, 2-28, 2-29,
2-33, 2-34, 4-8, 4-12
3–Sector Duplexed Cabling, 4-20
3–Sector Duplexed Cabling Configurations, 4-20
3–Sector Duplexed Directional Coupler to RFDS
Cabling Table, 4-21
3–Sector Non–Duplexed Cabling, 4-17
3–Sector Non–Duplexed Directional Coupler to
RFDS Cabling Table, 4-19
3-Sector Non-Duplexed Cabling Configuration, 4-18
6–Sector Duplexed Cabling, 4-22
6–Sector Duplexer–to–BTS Cabling Table, 4-24
60 degree sector configuration, 2-30, 4-9
60 Degree Sector Receive Path Cabling, 2-31, 4-10
6-Sector Dup, 4-23
A
acronyms, 1-3
Alarm / Span Cabling, 2-10
Alarm cable installation, 2-12
Alarm Connectors Pin and Signal Information, 2-15
Alarm signal specifications, 2-13
AMR, 1-3
Antenna Sharing, 3-8
ATP, 1-3
B
BBX, 1-3
BLO, 1-3
BTS, 1-3
BTS 120 Degree Sector (3 Sector) Receive Path
Cabling, 2-36, 4-14
BTS 120 Degree Sector (3 Sector) Transmit Path
Cabling, 2-33, 4-12
BTS 60 Degree Sector (6 Sector) Transmit Path
Cabling, 2-28, 4-8
BTS earth ground cables, 2-39
BTS Frame Site Layout, 1-7
BTS MC Expansion Frame (+27 V Configuration),
3-3
BTS Power Cabling, 2-41, 2-48
BTS Power Cabling for + 27 V Power Cables, 2-48
C
C–CCP, 1-3
Cable descriptions and part numbers, 2-7
Cable labels, 2-10
Cable Run List, 2-21
Cable run list, 2-11
Cabling diagram, 2-11
Cabling installation order, 2-2
Carrier Add Instructions, A-2
CBSC, 1-3
CCD, 1-3
CDMA, 1-3
CDMA RFDS Function, 4-4, 4-6
CE, 1-3
checklist, 5-2
Clean up the site, 5-2
CLI, 1-3
CLPA, 1-3
CM, 1-3
CMR, 1-3
Configurations Supported, 2-2
CSM, 1-3
Customer Equipment Considerations and System
Constrains, 3-10
D
DBM, 1-3
DBPF, 1-3
DDC, 1-3
Dimensions and Clearances for the BTS, 1-7
Directional Couplers and Bracket , 4-2
DSP, 1-3
Duplex Directional Couplers (DDC) and Mounting
Bracket, 4-3
E
Earth Ground Cabling, 2-39