User's Manual

Optimization (Pre–ATP) Data Sheets
68P64115A18–1
Mar 2003
1X SC 4812T Lite BTS Optimization/ATP Software Release R2.16.1.x
DRAFT
A-10
2–Carrier Adjacent Channel
Table A-8: TX Bay Level Offset Calibration (3–Sector: 2–Carrier Adjacent Channels)
OK Parameter Specification Comments
−
BBX2–1, ANT–1A = dB
BBX2–r, ANT–1A = dB
−
Calibrate
carrier 1
TX Bay Level Offset = 42 dB (typical),
38 dB (minimum) prior to calibration
BBX2–2, ANT–2A = dB
BBX2–r, ANT–2A = dB
−
BBX2–3, ANT–3A = dB
BBX2–r, ANT–3A = dB
−
BBX2–4, ANT–1B = dB
BBX2–r, ANT–1B = dB
−
Calibrate
carrier 2
TX Bay Level Offset = 42 dB (typical),
38 dB (minimum) prior to calibration
BBX2–5, ANT–2B = dB
BBX2–r, ANT–2B = dB
−
BBX2–6, ANT–3B = dB
BBX2–r, ANT–3B = dB
−
BBX2–1, ANT–1A = dB
BBX2–r, ANT–1A = dB
−
Calibration
Audit
carrier 1
0 dB (+0.5 dB) for gain set resolution
post calibration
BBX2–2, ANT–2A = dB
BBX2–r, ANT–2A = dB
−
carrier 1
BBX2–3, ANT–3A = dB
BBX2–r, ANT–3A = dB
−
BBX2–4, ANT–1B = dB
BBX2–r, ANT–1B = dB
−
Calibration
Audit
carrier 2
0 dB (+0.5 dB) for gain set resolution
post calibration
BBX2–5, ANT–2B = dB
BBX2–r, ANT–2B = dB
−
carrier 2
BBX2–6, ANT–3B = dB
BBX2–r, ANT–3B = dB
Comments:________________________________________________________
__________________________________________________________________
TX Antenna VSWR
Table A-9: TX Antenna VSWR
OK Parameter Specification Data
−
VSWR –
Antenna 1A
< (1.5 : 1)
−
VSWR –
Antenna 2A
< (1.5 : 1)
A