User's Manual

Index
68P64115A18–1
1X SC 4812T Lite BTS Optimization/ATP Software Release R2.16.1.x
DRAFT
Mar 2003
Index-6
LPA errors, 6-9
LPA Module LED, 6-34
LPA Shelf LED Status Combinations, 6-34
M
MASTER LED, GLI, 6-31
MCC LED Status Combinations, 6-33
MMI common connections, 3-32
MMI Connector
CSM, 6-30
GLI, 6-32
MMI Connectors, MCC, 6-33
MMI equipment setup, 3-32
Module status indicators, 6-28
Motorola CyberTest GPIB Address, F-10
Multi Channel Card. See MCC
Multi–FER test Failure, 6-17
N
NECF, 3-3
New installations, 1-5
No AMR control, 6-22
No BBX2 control in the shelf, 6-23
No DC input voltage to Power Supply Module, 6-24
No DC voltage +5 +65 or +15 Volts to a specific
GLI2 BBX2 or Switch board, 6-25
No GLI2 Control through span line connection, 6-22
No GLI2 Control via LMF, 6-22
No or missing MCC24 channel elements, 6-23
No or missing span line traffic, 6-23
North American, cellular telephone system frequency
spectrum, CDMA allocation, E-5
O
Online Help, 3-32
optimization/ATP, test set–up
HP 8921A, 800 MHz, H-20
HP 8921A, 1.9 GHz, H-20
Optional test equipment, 1-11
10 MHz rubidium standard, 1-12
2–way splitter, 1-11
CDMA subscriber mobile or portable
radiotelephone, 1-12
duplexer, 1-11
frequency counter, 1-11
LAN tester, 1-11
oscilloscope, 1-11
RF circular, 1-12
RF test cable, 1-11
spectrum analyzer, 1-11
Oscilloscope, optional test equipment, 1-11
P
PCMCIA, Ethernet adapter
LMF to BTS connection, 3-17
remove from BTS, 5-5
Periodic optimization, 1-5
Pilot Time Offset. See PN
Pilot time offset, acceptance test, 4-23
Ping, 3-33
PN
offset programming information, B-2
offset usage, B-2
PN offset per sector, B-2
PN Offset Usage , B-2
power
applying, 2-18
AC, 2-18
DC, 2-19
removal, 2-16
AC power, 2-17
DC power, 2-16
Power Delta Calibration
Advantest, H-15
Agilent 8935, H-9
HP8921A, H-12
Power Input, 6-20
Power Meter, setting GPIB address, HP437B, F-11
Power meter, TX acceptance tests, 4-7
Power Supply Module Interface, 6-20