User's Manual

Index
68P64115A18–1
1X SC 4812T Lite BTS Optimization/ATP Software Release R2.16.1.x
DRAFT
Mar 2003
Index-4
CSM frequency verification, 3-47
CSM LED Status Combinations, 6-29
D
DC Power Pre–test (BTS Frame), 2-6
DC Power Problems, SCCP Backplane
Troubleshooting, 6-24
DC/DC Converter LED Status Combinations, 6-28
Detailed, optimization/ATP test matrix, C-2
Devices, download. See Download
Digital Control Problems, 6-22
SCCP Backplane Troubleshooting, 6-22
Digital multimeter, required test equipment, 1-10
Directional coupler, required test equipment, 1-10
diversity receive path, definition, 3-83
companion frame, 3-83
stand–alone frame, 3-83
diversity RX path. See diversity receive path
Documents, required, 1-13
Download
See also Devices
BTS, 3-36
BTS system software, 3-4
Download BLO Procedure, 3-94
Download from the CBSC, prepare to leave the site,
5-4
download ROM and RAM code. See ROM code
Download/Enable MCCs, 3-43
Download/Enable MGLIs, 3-39
Duplexer, optional test equipment, 1-11
E
E1, isolate BTS from the E1 spans, 3-15
E4406A, calibration, F-25
Enable CSMs. See CSM
End LMF session, 5-5
Equipment Overview, 1-17
Equipment warm-up, 3-59
establish MMI communication, 3-31
Ethernet LAN
interconnect diagram, 3-33
transceiver, 1-8
Ethernet LAN termination, 2-5
Every test fails, Troubleshooting, RFDS, 6-26
F
Failure report generation, 4-29
FER, acceptance test, 4-28
Files, intermediate file, 4-29
files, calibration data, 3-84
Filtronics, low IM Duplexer (Cm035–f2) or
equivalent, optional test equipment, 1-11
Fluke, model 8062A with Y8134 test lead kit, test
equipment, 1-10
Folder Structure Overview, 3-7
Foreword, xx
forward link problem after passing reduced ATP, 6-15
Frame, equipage preliminary operations, 2-2
FREQ Monitor Connector, CSM, 6-30
Frequency counter, optional test equipment, 1-11
G
Gain set point, D-2
General Safety, xxii
Generating an ATP Report, 4-29
General optimization checklist, test data sheets, A-5
Gigatronics 8541C Power Meter GPIB Address, F-12
Gigatronics 8542 power meter, calibration, F-28
GLI Connector, 6-20
GLI Ethernet A and B Connections, 6-20
GLI LED Status Combinations, 6-31
GLI Pushbuttons and Connectors, 6-32
GLI2 Front Panel Operating Indicators, 6-32