User Manual
Optimization Overview – continued
Jan 2002
1-5
SC4812ET BTS Optimization/ATP — CDMA LMF
Table 1-1: CDMA LMF Test Equipment Support Table
Item Description
Advantest R3267 Analyzer
with Advantest R3562
Generator
Used for both IS–95A/B and CDMA 2000
testings
Hewlett Packard, model
HP 83236A
PCS interface for PCS band
Hewlett Packard, model HP
8935
Cellular communications analyzer
Motorola CyberTest Cellular communications analyzer
Advantest R3465 with 3561
CDMA option
Cellular communications analyzer
Gigatronix 8541C Power meter
HP437B Power meter
To ensure consistent, reliable, and repeatable optimization test results,
test equipment meeting the following technical criteria should be used to
optimize the BTS equipment. You can, of course, substitute test
equipment with other test equipment models supported by the LMF
meeting the same technical specifications.
LMF Hardware Requirements
An LMF computer platform that meets the following requirements (or
better) is recommended:
Notebook computer
266 MHz (32–bit CPU) Pentium processor
4 GB internal hard disk drive
Color display with 1024 x 768 pixel resolution and capability to
display more than 256 colors
Memory requirements:
– Minimum required RAM: 96 MB
– Recommended RAM:
– 128 MB for Windows 98 SE
– 256 MB for Windows 2000
CD ROM drive and 3 1/2 inch floppy drive
56 kbps V.90Modem
Serial port (COM 1)
Parallel port (LPT 1)
PCMCIA Ethernet interface card (for example, 3COM Etherlink III)
with a 10Base–T–to–coax adapter
. . . continued on next page
1