User Manual

Using CDMA LMF – continued

Jan 2002

3-37

SC4812ET BTS Optimization/ATP — CDMA LMF

Establishing an MMI

Communication Session

For those procedures that require MMI communications between the

LMF and BTS FRUs, follow the procedure in Table 3-18 to initiate the

communication session.

Table 3-18: Establishing MMI Communications

Step Action

1 Connect the LMF computer to the equipment as detailed in the applicable procedure that requires

MMI communication session.

2 Start the named HyperTerminal connection for MMI sessions by double clicking on its Windows

desktop shortcut.

NOTE

If a Windows desktop shortcut was not created for the MMI connection, access the connection from

the Windows Start menu by selecting:

Programs>Accessories>Hyperterminal>HyperTerminal><Named HyperTerminal Connection

(e.g., MMI Session).

3 Once the connection window opens, establish MMI communication with the BTS FRU by pressing

the LMF computer Enter key until the prompt identified in the applicable procedure is obtained.

NULL MODEM

BOARD

(TRN9666A)

8–PIN TO 10–PIN

RS–232 CABLE (P/N

30–09786R01)

RS–232 CABLE

8–PIN

CDMA LMF

COMPUTER

To FRU MMI port

DB9–TO–DB25

ADAPTER

Figure 3-7: CDMA LMF Computer Common MMI Connections

COM1

COM2

FW00687