User Manual

Using CDMA LMF – continued
SC4812ET BTS Optimization/ATP — CDMA LMF
Jan 2002
3-34
Table 3-14: BTS GUI Login Procedure
Step Action
10
Click on Login. (A BTS tab with the BTS is displayed.)
NOTE
 If you attempt to log in to a BTS that is already logged on, all devices will be gray.
 There may be instances where the BTS initiates a log out due to a system error (i.e., a device
failure).
 If the MGLI is OOS_ROM (blue), it will have to be downloaded with code before other devices can
be seen.
 If the MGLI is OOS–RAM (yellow), it must be enabled before other installed devices can be seen.
3