User's Manual
Index
68P09255A69-3
1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x
PRELIMINARY
Aug 2002
Index-6
LORAN-C Initialization/Verification, 3-48
LPA errors, 6-8
LPA Module LED, 6-33
LPA Shelf LED Status Combinations, 6-33
M
Master Group Line Interface. See MGLI
MASTER LED, GLI, 6-30
MCC LED Status Combinations, 6-32
MMI common connections, 3-29
MMI Connector
CSM, 6-29
GLI, 6-31
MMI Connectors, MCC, 6-32
MMI equipment setup, 3-29
Module status indicators, 6-27
Motorola CyberTest, setting GPIB address, F-9
Multi Channel Card. See MCC
Multi-FER test Failure, 6-16
N
New installations, 1-4
No AMR control, 6-21
No BBX2 control in the shelf, 6-22
No DC input voltage to Power Supply Module, 6-23
No DC voltage +5 +65 or +15 Volts to a specific
GLI2 BBX2 or Switch board, 6-24
No GLI2 Control through span line connection, 6-21
No GLI2 Control via LMF, 6-21
No or missing MCC24 channel elements, 6-22
No or missing span line traffic, 6-22
North American, cellular telephone system frequency
spectrum, CDMA allocation, D-4
O
Online Help, 3-29
optimization/ATP, test set-up
HP 8921A, 800 MHz, H-19
HP 8921A, 1.9 GHz, H-19
Optional test equipment, 1-10
10 MHz rubidium standard, 1-11
2-way splitter, 1-11
CDMA subscriber mobile or portable
radiotelephone, 1-11
duplexer, 1-10
frequency counter, 1-10
LAN tester, 1-10
oscilloscope, 1-11
RF circular, 1-11
RF test cable, 1-11
spectrum analyzer, 1-10
Oscilloscope, optional test equipment, 1-11
P
Patent Notification, xxvi
PCMCIA, Ethernet adapter
LMF to BTS connection, 3-22
remove from BTS, 5-4
Periodic optimization, 1-4
Pilot Time Offset. See PN
Pilot time offset, acceptance test, 4-20
Ping, 3-30
PN
offset programming information, E-1
offset usage, E-1
PN offset per sector, E-1
PN Offset Usage , E-1
power
applying, 2-20
AC, 2-20
DC, 2-21
removal, 2-18
AC power, 2-19
DC power, 2-18
Power Delta Calibration
Advantest, H-14
Agilent 8935, H-8
HP8921A, H-11
Power Input, 6-19
Power Meter, setting GPIB address, HP437B, F-10
Power meter
required test equipment, 1-9
setting GPIB address, Gigatronics 8542B, F-11
TX acceptance tests, 4-6
Power Supply Module Interface, 6-19
power-up, BTS. See power, applying
Pre-calibration, HP 437, F-25