User's Manual

Downloading ROM Code

68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

G-4

Table G-1: Download ROM and RAM Code to Devices

Step Action

12 From the LMF window menu bar Tools pull-down menus, select Update NextLoad > CDMA.

13 In the left-hand pane of the window which opens, click on the BTS number for the frame being loaded

(for example, BTS-14 ).

14 On the list of versions displayed in the right-hand pane, click the button next to the version number of

the folder that was used for the ROM code download (for example, 2.16.0.x) and click Save.

- A pop-up message will appear showing the CDF has been updated.

15 Click on the OK button to dismiss the pop-up message.

16 Click on the device that was loaded with ROM code.

NOTE

RAM code is automatically selected for download.

From the BTS menu bar Device pull-down menus, select Download > Code/Data to download RAM

code and dds file data.

- A status report is displayed showing the result of the download.

18 Click OK to close the status window.

19 Observe the downloaded non-GLI device to ensure it is OOS_RAM (yellow).

20 Click on the device which was loaded with code.

21 From the BTS menu bar Device pull-down menu, select Status.

Verify that the correct ROM and RAM version numbers are displayed in the status report window.

22 Click OK to close the status window.