User's Manual

Preparing the LMF – continued
PRELIMINARY
1X SCt4812ET Lite BTS Optimization/ATP
08/01/2001
3-10
Figure 3-2: BTS Folder Name Syntax Example
bts–259
BTS Number
bts–nnn.cal File
The CAL (Calibration) file contains the bay level offset data (BLO) that
is used for BLO downloads to the BBX devices. The CAL file is
automatically created and updated by the CDMA LMF when TX
calibration is performed. Figure 3-3 details the file name syntax for the
CAL file.
Figure 3-3: CAL File Name Syntax Example
bts–259.cal
BTS Number
bts–nnn.cdf File
The CDF file contains data that defines the BTS and data that is used to
download data to the devices. A CDF file must be placed in the
applicable BTS folder before the CDMA LMF can be used to log into
that BTS. CDF files are normally obtained from the CBSC using a
floppy disk. A file transfer protocol (ftp) method can be used if the
CDMA LMF computer has that capability. Figure 3-4 details the file
name syntax for the CDF file.
Figure 3-4: CDF Name Syntax Example
bts–259.cdf
BTS Number
3