User's Manual

Preparing the LMF – continued

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

3-8

Table 3-3: Create HyperTerminal Connection

Step Action

5 In the Port Settings tab of the COM# Properties window displayed, configure the RS–232 port

settings as follows:

S Bits per second: 9600

S Data bits: 8

S Parity: None

S Stop bits: 1

S Flow control: None

6 Click OK.

7 Save the defined connection by selecting:

File > Save

8 Close the HyperTerminal window by selecting:

File > Exit

9 Click the Yes button to disconnect when prompted.

10 If the Hyperterminal folder window is still open, proceed to step 12.

11 Select Communications and double click the Hyperterminal folder.

12 Highlight the newly–created connection icon by clicking on it.

13 Right click and drag the highlighted connection icon to the Windows desktop and release the right

mouse button.

14 From the popup menu which appears, select Create Shortcut(s) Here.

15 If desired, reposition the shortcut icon for the new connection by dragging it to another location on the

Windows desktop.

16 Close the Hyperterminal folder window by selecting:

File > Close