User's Manual

Preparing the LMF

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

3-4

Overview

Before optimization can be performed, the CDMA LMF must be

installed and configured on a computer platform meeting

Motorola–specified requirements (see Recommended Test Equipment

and Software in Chapter 1).

For the CDMA LMF graphics to display properly, the

computer platform must be configured to display more

than 256 colors. See the operating system software

instructions for verifying and configuring the display

settings.

IMPORTANT

Software and files for installing and updating the CDMA LMF are

provided on CD ROM disks. The following items must be available:

S CDMA LMF Program on CD ROM

S CDMA LMF Binaries on CD ROM

S Configuration Data File (CDF) for each supported BTS (on floppy

disk)

S CBSC File for each supported BTS (on floppy disk)

The following section provides information and instructions for

installing and updating CDMA LMF software and files.

LMF Installation and Update Procedures

First Time Installation Sequence:

1. Install Java Runtime Environment (JRE)

2. Install U/WIN K–shell emulator

3. Install LMF software

4. Install BTS Binaries

5. Install/create BTS folders

NOTE

Follow the procedure in Table 3-1 to:

1. Install the CDMA LMF program using the CDMA LMF CD ROM

2. Install binary files using the CDMA LMF CD ROM

Table 3-1: CD ROM Installation

n Step Action

1 Insert the CDMA LMF CD ROM disk into your disk drive.

S If the Setup screen appears, follow the instructions displayed on the screen.

S If the Setup screen is not displayed, proceed to Step 2.

2 Click on the Start button