User's Manual

Required Test Equipment and Software – continued
PRELIMINARY
1X SCt4812ET Lite BTS Optimization/ATP
08/01/2001
1-6
Required Test Equipment and
Software
The following test equipment and software is required for the
optimization procedure. Common assorted tools such as screwdrivers
and frame keys are also needed. Read the owner’s manual for all of the
test equipment to understand its individual operation before using the
tool in the optimization.
Always refer to specific OEM test equipment
documentation for detailed operating instructions.
NOTE
CDMA LMF Hardware Requirements
A CDMA LMF computer platform that meets the following
requirements (or better) is recommended:
S Notebook computer
S 266 MHz (32 bit CPU) Pentium processor
S 4 Gbyte internal hard disk drive
S SVGA 12.1–inch active matrix color display with 1024 x 768
(recommended) or 800 x 600 pixel resolution and capability to display
more than 265 colors
S 64 MB RAM minimum (128 MB recommended)
S 20X CD–ROM drive
S 3 1/2 inch floppy drive
S 56kbps V.90 modem
S Serial port (COM 1)
S Parallel port (LPT 1)
S PCMCIA Ethernet interface card (for example, 3COM Etherlink III)
with a 10BaseT–to–coax adapter
S MSr Windows 98R Second Edition (SE) operating system
If 800 x 600 pixel resolution is used, the CDMA LMF
window must be maximized after it is displayed.
NOTE
CDMA LMF Software
The CDMA LMF is a graphical user interface (GUI) based Local
Maintenance Facility (LMF). This software product is specifically
designed to provide cellular communications field personnel with the
capability to support the following CDMA Base Transceiver Stations
(BTS) operations:
1