User's Manual

RFDS Set-up and Calibration68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

3-101

Program TSU NAM

The NAM must be programmed before it can receive and process test

calls, or be used for any type of RFDS test.

Prerequisites

 MGLI is INS_ACT (bright green).

 SUA is powered up and has a code load.

Follow the procedure in Table 3-52 to program the TSU NAM.

Table 3-52: Program NAM Procedure

Step Action

1 In the LMF, select the RFDS tab.

2 Select the SUA by clicking on it.

3 Click on TSU in the BTS menu bar, and select Program TSU NAM from the pull-down menu.

- A NAM programming window will appear.

4 Enter the appropriate information in the boxes (see Table 3-46 and Table 3-47) .

5 Click on the OK button to display the status report.

6 Click on the OK button to close the status report window.