User's Manual

Preparing the LMF

68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

3-8

Software Release 2.16.0.x Hardware Binary Files

Follow the procedure in Table 3-3 to make certain the correct R16.0

ROM and RAM code files and device data files are loaded on the LMF

computer.

Table 3-3: Verify Software Release 2.16.0.x Device Binary Files Are Installed

Step Action

1 If it has not been done previously, install the LMF software on the LMF computer in accordance with

Table 3-1.

2 If it is not running, start the MS Windows operating system on the LMF computer. If the computer is

running and the LMF is logged into a BTS, logout and exit the program.

3 Start MS Windows Explorer from the Windows desktop by selecting Start > Programs > Windows

Explorer.

4 In the left-hand pane of MS Windows Explorer, locate the <lmf home directory> folder on x:\ drive

(installation default is c:\wlmf), and expand it (click on the “+” symbol next to the folder) to display

the cdma and help folders.

5 Expand the cdma folder, locate the loads folder, and expand it.

6 Determine if there is a 2.16.0.x.x folder with final numbers as specified for the software release used

in the BSS (for example, 2.16.0.84.4).

- If no folder of the correct revision level exists, obtain the latest Software Release 2.16.0.x.x

device binary files from Motorola and copy them onto the LMF computer in the <x>:\<lmf home

directory\cdma\loads\<codeload#> directory.

- If a <codeload#> folder of the correct revision level exists, proceed to step 7.

7 Expand the 2.16.0.x.x folder to display the code and data folders.

8 In the left-hand pane, click on the code folder, and in the right-hand pane look for the following files,

as applicable to the devices with which the BTS is equipped:

 gli_ram.bin.0103 (RAM code file for GLI2 devices)

 gli_rom.bin.0103 (ROM code file for GLI2 devices)

 bbx_ram.bin.605 (RAM code for BBX2 devices)

 bbx_rom.bin.605 (ROM code for BBX2 devices)

 bbx_ram.bin.060A (RAM code for 800 MHz and 1.9 GHz BBX-1X devices)

 bbx_rom.bin.060A (ROM code for 800 MHz and 1.9 GHz BBX-1X devices)

 mcp_ram.bin.0c01 (RAM code for MCC8/MCC24E devices)

 mcp_rom.bin.0c01 (ROM code MCC8/MCC24E devices)

 mcp_ram.bin.0c04 (RAM code for MCC-1X devices)

 mcp_rom.bin.0c04 (ROM code for MCC-1X devices)

. . . continued on next page