User's Manual

Preliminary Operations: Overview68P09255A69-3
Aug 2002
1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x
PRELIMINARY
2-3
Setting Frame SCCP Configuration Switch
The backplane configuration switch is located behind the frame rear
access panel. It must be set for the frame type as shown in Figure 2-1.
The switch setting must be verified and set before power is applied to the
BTS equipment.
Figure 2-1: Backplane DIP Switch Settings
REAR ACCESS
PANEL
T-27 BUTTON HEAD OR
T-30 PAN HEAD
TAMPER-RESISTANT
FASTENER (14)
SC4812ETL0022-1
ON
OFF
STARTER
OR COMPANION
FRAME SETTING
(FRAME 1)
2