User's Manual
Required Test Equipment and Software68P09255A69-3
Aug 2002
1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x
PRELIMINARY
1-9
9-pin D (female) 9-pin D (female)
GND 5 5 GND
RX 3
3 RXTX 2
2 TX
RTS 7 7 RTS
RSD/DCD 1 1 RSD/DCD
DTR 4 4 DTR
DSR 6 6 DSR
Model SLN2006A MMI interface kit
Motorola Model TRN9666A null modem board. Connectors on
opposite sides of the board must be used as this performs a null
modem transformation between cables. This board can be used for
25-pin to 8-pin, 25-pin to 25-pin, and 10-pin to 10-pin conversions.
Motorola 30-09786R01 MMI cable or equivalent; used to interface
the LMF computer serial port connection to the Group Line Interface
(GLI), Clock Synchronization Manager (CSM), External Trunked
Interface Board (ETIB), and module debug serial ports.
Communications system analyzer CDMA/analog
IS-95A/B-only test capability - The following communications system
analyzers which provide only IS-95A/B test capability are supported by
the LMF:
Motorola CyberTest
Advantest R3465 spectrum analyzer with R3561L signal generator
Hewlett Packard Model HP 8921A/600 Analyzer including 83203B
CDMA Interface, manual control system card, and, for 1900 MHz
BTSs, 83236A/B PCS Interface
CDMA2000 1X and IS-95A/B test capability - The following
communications system analyzers which provide both CDMA2000 1X
and IS-95A/B test capability are supported by the LMF:
Agilent 8935 series E6380A communications test set (formerly HP
8935) with option 200 or R2K for CDMA2000 1X support
Agilent E4406A
Advantest R3267 spectrum analyzer
A combination of test equipment supported by the LMF may also be
used during optimization and testing of the RF communications portion
of BTS equipment when the communications system analyzer does not
perform all of the following functions:
Frequency counter
Deviation meter
RF power meter (average and code domain)
1