User's Manual
Required Test Equipment and Software68P09255A69-3
Aug 2002
1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x
PRELIMINARY
1-7
Required Test Equipment and Software
The following test equipment and software is required for the
optimization procedure. Common assorted tools such as screwdrivers
and frame keys are also needed. Read the owner’s manual for all of the
test equipment to understand its individual operation before using the
tool in the optimization.
NOTE
Always refer to specific OEM test equipment documentation for
detailed operating instructions.
LMF Hardware Requirements
An LMF computer platform that meets the following requirements (or
better) is recommended:
Notebook computer
266 MHz (32 bit CPU) Pentium processor
4 GB internal hard disk drive
SVGA 12.1-inch active matrix color display with 1024 x 768
(recommended) or 800 x 600 pixel resolution and capability to display
more than 265 colors
Memory requirements:
- Minimum required RAM: 96 MB
- Recommended RAM:
-- 128 MB for Windows 98 SE
-- 256 MB for Windows 2000
20X CD-ROM drive
3 1/2 inch floppy drive
56kbps V.90 modem
Serial port (COM 1)
Parallel port (LPT 1)
PCMCIA Ethernet interface card (for example, 3COM Etherlink III)
with a 10BaseT-to-coax adapter
MS Windows 98 Second Edition (SE) or Windows 2000 operating
system
NOTE
If 800 x 600 pixel resolution is used, the LMF window must be
maximized after it is displayed.
1