User's Manual
Abbreviated (All-inclusive) Acceptance Tests68P09255A69-3
Aug 2002
1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x
PRELIMINARY
4-9
Abbreviated (All-inclusive) Acceptance Tests
All-inclusive Tests
General - The all-inclusive acceptance tests are performed from the
LMF GUI environment. These all-inclusive tests are called abbreviated
ATPs because they execute various combinations of individual
acceptance tests with a single command. This allows verification of
multiple aspects of BTS performance while minimizing time needed for
individual test set up and initiation.
Abbreviated ATP Options - There are three abbreviated acceptance
tests which evaluate different performance aspects of the BTS. This
allows the CFE to select testing to meet the specific requirements for
individual maintenance and performance verification situations. The
following summarizes the coverage of each abbreviated test:
All TX/RX. Performs all transmit and receive ATPs on the selected
MCCs and BBXs.
All TX. Performs complete set of transmit ATPs on the selected
MCCs and BBXs. Testing is the equivalent of performing all of the
following individual tests:
- TX Mask Test
- Rho Test
- Pilot Time Offset Test
- Code Domain Power Test
All RX. Performs complete receive ATP on the selected MCCs and
BBXs. Testing is the equivalent of performing the following:
- FER Test
Abbreviated ATP Procedures - Procedures to accomplish each type of
abbreviated ATP are included in the following subsections.
4