User's Manual

Acceptance Tests - Test Set-up

68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

4-8

Companion frame All TX/RX, All RX, and FER for Diversity RX -

When performing All TX/RX, All RX, or FER ATP for companion

frame diversity RX, perform the additional test equipment set-up

procedures in Table 4-4.

Table 4-4: Additional Diversity RX Test Set-up for Companion Frames

Step Action

1 If the LMF is logged into the BTS, log out of the BTS.

2 If the inter-frame diversity RX cabling to a collocated companion frame is:

 Connected to the companion frame under test, proceed to step 3.

 Disconnected from the companion frame under test, proceed to step 7.

3 For companion frames with inter-frame diversity RX cables connected, click on the LMF Login tab.

4 In the Equipage Information box, select MPC from the Multi-Channel Preselector picklist.

5 Make RX test cable connections for diversity RX FER according to Figure 4-1 and Table 4-1.

6 Proceed to step 10.

7 For companion frames with inter-frame diversity RX cables disconnected, click on the LMF Login

tab.

8 In the Equipage Information box, select EMPC from the Multi-Channel Preselector picklist.

9 Make RX test cable connections for diversity RX FER according to Figure 4-1 and Table 4-2.

10 Click on the LMF BTS# tab, and return to the procedure for the ATP being performed.