User's Manual

Updating Calibration Data Files68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

5-3

Table 5-2: Copying CAL Files from Diskette to the CBSC

Step Action

9a - Type the following command:

dos2unix /floppy/no_name/bts-#.cal bts-#.cal

Where: # = BTS number for which the CAL file was created

- Press the Enter key.

NOTE

Other versions of Unix do not support the dos2unix command. In these cases, use the Unix cp

(copy) command. The copied files will contain DOS line feed characters which must be edited out

with a Unix text editor.

10 Type in ls -l *.cal and press the Enter key. Verify the CAL files have been copied.

- Verify all CAL files to be transferred appear in the displayed listing.

11 Type eject, and press the Enter key.

12 Remove the diskette from the workstation.