User's Manual

Updating Calibration Data Files

68P09255A69-3

Aug 2002

1X SC4812ET Lite BTS Optimization/ATP Software Release 2.16.1.x

PRELIMINARY

5-2

Updating Calibration Data Files

After completing the TX calibration and audit, updated CAL file

information must be moved from the LMF Windows environment back

to the CBSC, a Unix environment. The following procedures detail

moving files from one environment to the other.

Copying CAL files from LMF to a Diskette

Follow the procedures in Table 5-1 to copy the CAL files from an LMF

computer to a 3.5 diskette.

Table 5-1: Copying CAL Files to a Diskette

Step Action

1 With Windows running on the LMF computer, insert a disk into Drive A:\.

2 Launch the Windows Explorer application program from the Start > Programs menu list.

3 Select the applicable <x>:\<lmf home directory/cdma/bts-# folder.

4 Drag the bts-#.cal file to Drive A.

5 Repeat Steps 3 and 4, as required, for other bts-# folders.

Copying CAL Files from Diskette to the CBSC

Follow the procedures in Table 5-2 to copy CAL files from a diskette to

the CBSC.

Table 5-2: Copying CAL Files from Diskette to the CBSC

Step Action

1 Log into the CBSC on the OMC-R Unix workstation using your account name and password.

2 Place the diskette containing calibration file(s) in the workstation diskette drive.

3 Type in eject -q and press the Enter key.

4 Type in mount and press the Enter key.

NOTE

 Check to see that the message “floppy/no_name” is displayed on the last line.

 If the eject command was previously entered, floppy/no_name will be appended with a number.

Use the explicit floppy/no_name reference displayed.

5 Type in cd /floppy/no_name and press the Enter key.

6 Type in ls -lia and press the Enter key.

- Verify the bts-#.cal file filename appears in the displayed directory listing.

7 Type in cd and press the Enter key.

8 Type in pwd and press the Enter key.

- Verify the displayed response shows the correct home directory (/home/<user’s name>).

9 With Solaris versions of Unix, create a Unix-formatted version of the bts-#.cal file in the home

directory by performing the following:

. . . continued on next page