User's Manual

Attaching Front Fin Cover to Unit

DRAFT

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

JAN 2002

6-18

Objective

The objective of this procedure is to attach the front fin cover to the

MicroCell unit.

When to Use the Fin Covers

Always use fin covers for an indoor application.

Procedure to Attach the Front

Fin Cover to Unit

Follow the procedure in Table 6-13 to attach the front fin cover to the

unit. Refer to Figure 6-12.

Table 6-13: Procedure to Attach the Front Fin Cover to Unit

Step Action

1 Center fin cover on the fins of the unit. See Figure 6-12 for snap locations.

2 Align snap with center tab on fins.

3 Push fin cover into place.

Figure 6-12: Attaching Front Fin Cover to Unit

MICROCELL FINS

LOCATION OF SNAPS TO ATTACH

FIN COVER TO UNIT