User's Manual
Cable Descriptions – continued
JAN 2002
4-5
SC300 1X BTS Hardware Installation, ATP, and FRU Procedures
DRAFT
Table 4-8: MicroCell Expansion Kit for Units 3 to 4 Current 2m MIBs A and C – T448H
Cable Qty. Motorola Part
Number
Description
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
n/a 2 5882106P01 50 Ohm Antenna Terminator
E 1 3087707C03 MIB A cable (current, 2m; micro)
G 1 3087707C05 MIB C cable (current, 2m)
Table 4-9: MicroCell Expansion Kit for Units 3 to 4 Longer 5M MIBs A and C – T448G
Cable Qty. Motorola Part
Number
Description
n/a 2 5882106P01 50 Ohm Antenna Terminator
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
E 1 3087707C03 MIB A cable (current, 5m; micro)
J 1 3087707C08 MIB C cable (long, 5m)
Motorola Kits for RGPS
Cabling
Table 4-10 and Table 4-11 show the contents of Motorola kits
SGKN4351A and SGKN4352A. These kits are necessary for RGPS
cabling between multiple logical BTS locations.
Table 4-10: RGPS Synchronization Cable Kit – SGKN4351A
Cable Qty. Motorola Part
Number
Description
X 1 3086039H18 RGPS Sync Cable, 2000 ft.
n/a 2 5864461A03 Fitting, liquid tight.
n/a 2 0264599A02 Nut, nylon locking
Table 4-11: RGPS Synchronization Cable Kit – SGKN4352A
Cable Qty. Motorola Part
Number
Description
X 1 3086039H19 RGPS Sync Cable, 3280 ft.
n/a 2 5864461A03 Fitting, liquid tight.
n/a 2 0264599A02 Nut, nylon locking
4