User's Manual

Site Cleanup

DRAFT

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

JAN 2002

6-42

Remove Protective Covering

Remove any antistatic plastic or cloth sheeting that was used to cover the

equipment.

Lighting Fixtures

Remove the masking tape from the fluorescent light fixtures.

Tools

Place all hand and power tools in the installation tool kit or other

appropriate place. Note any tools that need replacement, cleaning, or

adjustment.

Materials

Place any leftover materials in a location specified by the site manager.

Remove Debris

Remove any packing material.

Ensure that all scrap materials have been removed from any tables or

stands.

Clean/sweep the floor. Ensure that all alignment marks have been

removed.

Environment

Remove any temporary weather protection used for installation.

Check that all covers are in place.

Check that the power connections are tight.

Organize any items (manuals, materials, etc.) left on site and place them

in a location specified by the site manager.

Check that the unit lock is secure and key is removed.

Check that solar cover is secure.

Verify that cabling is properly secured between unit and enclosures.