User's Manual

MIB Cabling for Multi–Unit Logical BTS Configurations – continued
DRAFT
SC300 1X BTS Hardware Installation, ATP, and FRU Procedures
JAN 2002
6-36
Table 6-31: Microcell Expansion Kit for Units 3 to 4 Longer 5M MIBs A and C – T448G
Cable Qty. Motorola Part
Number
Description
n/a 2 5882106P01 50 Ohm Antenna Terminator
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
E 1 3087707C03 MIB A cable (current, 5m; micro)
J 1 3087707C08 MIB C cable (long, 5m)
Procedure to Install MIB
Cabling
Cable the units as shown in Figure 6-28, Figure 6-27 or Figure 6-26.
Refer to the “Connector Locations” procedure in this chapter. Make sure
to terminate any unused connectors.
Figure 6-26: MIB Cabling for Two Units
UNIT 1
UNIT 101
MIB C
MIB B
MIB A
MIB C
MIB B
MIB A
E/1 MIB
OR
K/1 MIB
6