User's Manual

Subscriber Unit (SU) Test and Setup – continued

DRAFT

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

JAN 2002

7-70

Table 7-41: Procedure to Test and Verify the Subscriber Unit

Step Action

7 Enter the following command at the sc300’x–1> prompt to view the ESN number of the SU

and the CAMPS version:

su version

The system will display the following output. Note that the ESN numbers will be different, but

everything else will remain as shown below.

sc300’x–1>

su version

COMMAND ACCEPTED: su version

***************su version***************

Model :+GMM: C401M

GMIinfo :+GMI: SANYO Electric Co., Ltd.

GMRinfo :+GMR: 1.310

GOI_id :+GOI:

GSN_id :+GSN: 1869FE88

GCAP_format :+GCAP: +CIS707, +MS, +ES, +FCLASS

ESN: 0x1869FE88

8 Press ENTER once to return to the sc300’x–1> prompt. Proceed to the “Subscriber Unit

Programming” procedure in Table 7-42.