User's Manual

Create CAL File continued
DRAFT
SC300 1X BTS Hardware Installation, ATP, and FRU Procedures
JAN 2002
7-66
Procedure to Create a CAL File
Use the following procedure in Table 7-40 to create a CAL file.
Table 7-40: Procedure to Create a CAL File
Step Action
1 Log on to the BTS if you have not already done so.
2 Select the MAWI.
3 Click on the Device menu.
4 Click on the Create Cal File menu item.
The status report window displays the results of the action.
5 Click OK.
The bts#.cal is located in the wlmf\cdma\bts#
folder (where # is the number of the BTS).
NOTE
7