User's Manual

List of Tables – continued

JAN 2002

SC300 1X BTS Hardware Installation, ATP, and FRU Procedures

DRAFT

Table 4-8: MicroCell Expansion Kit for Units 3 to 4

Current 2m MIBs A and C – T448H 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-9: MicroCell Expansion Kit for Units 3 to 4

Longer 5M MIBs A and C – T448G 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-10: RGPS Synchronization Cable Kit – SGKN4351A 4-5. . . . . . . . . . . .

Table 4-11: RGPS Synchronization Cable Kit – SGKN4352A 4-5. . . . . . . . . . . . .

Table 4-12: Required Cables for Power, Earth Ground, and

Battery Connections 4-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-13: AC Input Cable Information 4-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-14: DC Input Cable Information 4-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-15: Procedure to Install Earth Ground Cable 4-13. . . . . . . . . . . . . . . . . . . . .

Table 4-16: Procedure to Install AC Input Cable(s) (Indoor Applications) 4-13. . . .

Table 4-17: Procedure to Install AC Installation Box

(Optional – Required for Outdoor Installations) 4-13. . . . . . . . . . . . . . . . . . . . . . . .

Table 4-18: AC Installation Box Cabling 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-19: Procedure to Install DC Input Cable(s) 4-14. . . . . . . . . . . . . . . . . . . . . .

Table 4-20: Required Cables for Antenna Connections 4-15. . . . . . . . . . . . . . . . . . .

Table 4-21: Pin and Signal Information for Cable C (Antenna Cable) 4-15. . . . . . .

Table 4-22: Required Cables for Site I/O, Span Line, RGPS, and

Modem Cabling 4-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-23: Pin/Signal Information for Site I/O Cable 4-20. . . . . . . . . . . . . . . . . . . .

Table 4-24: Connecting the RGPS to the Site I/O Cable 4-23. . . . . . . . . . . . . . . . . .

Table 4-25: Required Cables for RGPS Cabling for Multiple BTS Sites 4-24. . . . .

Table 4-26: RGPS Synchronization Cable Kit – SGKN4351A 4-24. . . . . . . . . . . .

Table 4-27: RGPS Synchronization Cable Kit – SGKN4352A 4-24. . . . . . . . . . . .

Table 4-28: Procedure to Install RGPS Cabling for an Indoor Installation 4-25. . . .

Table 4-29: Procedure to Install RGPS Cabling for an Outdoor Installation 4-26. . .

Table 4-30: Twisted Pairs for RGPS Sync Cable (Cable X) 4-28. . . . . . . . . . . . . . .

Table 4-31: Multi–BTS Cable Run List 4-29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-32: Required Cables for Span Line Daisy Chain Cabling 4-32. . . . . . . . . . .

Table 4-33: Cable Run List for Span Line Daisy Chain Cabling 4-32. . . . . . . . . . . .

Table 5-1: Procedure to Attach the Surge Suppressor to the Mounting Bracket 5-6

Table 5-2: Required Cables for Power, Earth Ground, and Battery Connections 5-9

Table 5-3: AC Input Cable Information 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 5-4: DC Input Cable Information 5-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 5-5: Procedure to Install the Master Ground Cable on a

BTS Equipped with Optional Primary Surge Suppressor 5-10. . . . . . . . . . . . . . . . .

Table 5-6: Procedure to Install the Earth Ground Cable on a

BTS Equipped with Optional Primary Surge Suppressor 5-11. . . . . . . . . . . . . . . . .