User's Manual Part 3

Appendix A: Optimization (Pre–ATP) Data Sheets – continued
DRAFT
SC4812ET BTS Optimization/ATP — CDMA LMF
Apr 2001
A-14
Table A-10: TX BLO Calibration (6–Sector: 1–Carrier, 2–Carrier Non–adjacent Channels)
OK CommentsSpecificationParameter

BBX2–1, ANT–1 = dB
BBX2–r, ANT–1 = dB

BBX2–2, ANT–2 = dB
BBX2–r, ANT–2 = dB

Calibration
0 dB (+0.5 dB) for gain set resolution
BBX2–3, ANT–3 = dB
BBX2–r, ANT–3 = dB

Audit
carrier 1
post calibration
BBX2–4, ANT–4 = dB
BBX2–r, ANT–4 = dB

BBX2–5, ANT–5 = dB
BBX2–r, ANT–5 = dB

BBX2–6, ANT–6 = dB
BBX2–r, ANT–6 = dB

BBX2–7, ANT–1 = dB
BBX2–r, ANT–1 = dB

BBX2–8, ANT–2 = dB
BBX2–r, ANT–2 = dB

Calibration
0 dB (+0.5 dB) for gain set resolution
BBX2–9, ANT–3 = dB
BBX2–r, ANT–3 = dB

Audit
carrier 2
post calibration
BBX2–10, ANT–4 = dB
BBX2–r, ANT–4 = dB

BBX2–11, ANT–5 = dB
BBX2–r, ANT–5 = dB

BBX2–12, ANT–6 = dB
BBX2–r, ANT–6 = dB
Comments:________________________________________________________
__________________________________________________________________
A