User's Manual Part 3

Prepare to Leave the Site – continued

DRAFT

SC4812ET BTS Optimization/ATP — CDMA LMF

Apr 2001

5-2

Table 5-2: Copy Files from LMF to a Diskette

Step Action

3 Click on your C: drive.

4 Double Click on the wlmf folder.

5 Double Click on the CDMA folder.

6 Click on the bts–# folder for the calibration file you want to copy.

7 Drag the BTS–#.cal file to the 3–1/2 floppy (A:) icon on the top left of the screen and release the

mouse button.

8 Continue step 6 and 7 until you have copied each file desired and close the Windows Explorer

program by selecting Close from the File menu option.

Copying CAL files from diskette to the CBSC

Follow the procedures in Table 5-3 to copy CAL files from a diskette to

the CBSC.

Table 5-3: Copy CAL Files From Diskette to the CBSC

Step Action

1 Log into the CBSC workstation.

2 Place your diskette containing CAL file(s) in the CBSC workstation diskette drive.

3 Enter eject –q and press the Enter key.

Enter mount and press the Enter key. Verify that floppy/no_name is displayed.

NOTE

If the eject command has been previously entered, floppy/no_name will be appended with a number.

Use the explicit floppy/no_name reference displayed.

5 Enter cd /floppy/no_name and press the Enter key.

6 Enter ls –lia and press the Enter key. Verify that the bts–#.cal file is on the disk.

7 Enter cd and press the Enter key.

8 Enter pwd and press the Enter key. Verify that you are in your home directory (/home/<name>).

9 Enter dos2unix /floppy/no_name/bts–#.cal bts–#.cal and press the Enter key (where # is the BTS

number).

10 Enter ls –l *.cal and press the Enter key. Verify that the CAL file was successfully copied.

11 Enter eject and press the Enter key.

12 Remove the floppy disk from the workstation.