User's Manual Part 1
Optimization Overview – continued
Apr 2001
1-5
SC4812ET BTS Optimization/ATP — CDMA LMF
DRAFT
Table 1-1: CDMA LMF Test Equipment Support Table
Item Description
Hewlett Packard, model
HP 8935
Cellular cmmunications analyzer
Motorola CyberTest Cellular communications analyzer
Advantest R3465 with
3561 CDMA option
Cellular communications analyzer
Gigatronix 8541C Power meter
HP437B Power meter
To ensure consistent, reliable, and repeatable optimization test results,
test equipment meeting the following technical criteria should be used to
optimize the BTS equipment. You can, of course, substitute test
equipment with other test equipment models supported by the LMF
meeting the same technical specifications.
LMF Hardware Requirements
An LMF computer platform that meets the following requirements (or
better) is recommended:
Notebook computer
266 MHz (32 bit CPU) Pentium processor
4 Gbyte internal hard disk drive
Color display with 1024 x 768 (recommended) or 800 x 600 pixel
resolution
64 MB RAM
CD ROM drive
3 1/2 inch floppy drive
Serial port (COM 1)
Parallel port (LPT 1)
PCMCIA Ethernet interface card (for example, 3COM Etherlink III)
with a 10Base–T–to–coax adapter
Windows 98/NT operating system
If 800 x 600 pixel resolution is used, the LMF window
must be maximized after it is displayed.
NOTE
1