Manual
Index
68P09258A31–A
1X SCt 4812T BTS Optimization/ATP
Oct 2003
Index-4
Copy and Load Cal File to to CBSC, 5-2
Copy CAL Files From Diskette to the CBSC, 5-3
Copy CBSC CDF Files to the LMF, 3-11
Copying CAL files from CDMA LMF to the CBSC,
5-2
Copy CAL files to the CBSC, 5-3
CSM
Clock Source, 3-40
clock source, select, 3-40
Enable, 3-41
frequency verification, 3-45
functions, 3-43
LEDs, 3-43
MMI terminal connection, illustration, 3-47
redundancy/alarm tests, 3-116
Reference Source Configuration Error, 6-12
Troubleshooting, 6-12, 6-13
CSM clock source, select, 3-40
CyberTest, 3-57
D
Data Download Failure, Troubleshooting, 6-5
DC Power Pre–test
+27 V BTS frame detail, 2-8
–48 V BTS frame detail, 2-10
BTS Frame, 2-6
RFDS, 2-12
RFDS detail, 2-12
DC Power Problems, 6-19
DC/DC Converter, LED Status Combinations, 6-21
Device Enable (INS) Failure, Troubleshooting, 6-6
Digital Control Problems, C–CCP Backplane
Troubleshooting, 6-16
Digital Multimeter, 1-10
Directional Coupler, 1-10
Distribution shelf, alarm/redundancy tests, 3-113
Download
BLO, 3-94
BTS, 3-35
BTS system software, 3-4
Non–MGLI2 Devices, 3-39
ROM Code, G-2
Download/Enable MGLIs, 3-38
E
E1, isolate BTS from the E1 spans, 3-15
E4406A, calibration, F-27
Enable
CSMs, 3-41
MCCs, 3-42
Redundant GLIs, 3-42
Equipment setup, VSWR, HP Test Set, I-3
Ethernet LAN
interconnect diagram, 3-33
Transceiver, 1-8
Ethernet maintenance connector interface, illustration,
3-17
External Test Equipment Removal, 5-4
F
Folder Structure Overview, 3-7
Foreword, xxi
Frame Error Rate, 4-8
FREQ Monitor Connector, CSM, 6-23
Frequency counter, optional test equipment, 1-11
Frequency Spectrum
Korean PCS (1700 MHz), E-7
North American Cellular Telephone System (800
MHz), E-5
North American PCS (1900 MHz), E-2
G
Gain set point, BBX, D-2
General Safety, xxiii
Generating an ATP Report, 4-16
General optimization checklist, test data sheets, A-5
Gigatronics 8541C Power Meter GPIB Address, F-15
Gigatronics Power Meter, 3-57
GLI. See Master (MGLI2) and Slave (SGLI2) Group
Line Interface
GLI2
Connector, 6-15
Ethernet Connections, 6-15
LED Status, 6-23
No Control through span line connection, 6-16
No Control via LMF, 6-16
GPIB, set address, HP 437B, F-14
GPIB Cable, 1-10