Manual

Verify and Upgrade rommon Version68P09258A31–A
Oct 2003
1X SCt 4812T BTS Optimization/ATP
J-63
Table J-13: Verify and Replace Installed rommon Version Using a tftp Server
Step Action
27
If no additional tftp transfer activities will be performed, change the NIC IP address and subnet mask
back to those for LMF–BTS communication recorded in Table J-4, step 9b.
CAUTION
If the BTS 10base–2 LAN IP address and subnet mask for the LMF computer’s NIC are not restored,
the LMF can not log into a BTS when attempting to perform a BTS optimization or ATP.
Method 2: Verification and Replacement of Installed rommon Version Using
a CF Memory Card Reader
Description
This procedure covers using an LMF computer equipped with a CF
memory card reader to perform the following activities:
1. Verify the rommon version loaded and running on a BTS router
2. Replace the rommon version installed in a BTS router
Additional required equipment/software
For this method, the following equipment item and associated software
is required in addition to the common items required for both methods:
S CF memory card reader device and software driver for the operating
system installed on the LMF computer
CAUTION
Card readers for other non–volatile, solid–state memory devices
such as Smart Media cards will not work with the CF memory
cards used in the MWR 1941 routers. Do not attempt to use a
card reader intended for another type of memory device.
Prerequisites
The following are required prior to performing this procedure:
S The LMF computer and BTS router have been prepared for CF
memory card reader file transfer and are operating as they would be
after performing the procedures in steps 1 through 8 of Table J-8
S A copy of the required rommon version is loaded into the desired
directory of the LMF computer
File operations using a CF memory card reader
Only file transfers should be performed using the CF memory card
reader. CF memory card formatting should be performed in a BTS router
using a HyperTerminal connection. Attempting to format a CF memory
card from a Windows–based computer using a card reader could result in
unpredictable BTS router operation.
CAUTION
Do not format BTS router CF memory cards using a
Windows–based computer. Only format CF memory cards in a
BTS router.
J