Manual

Verifying IOS Canned Version of the CF Memory Card
68P09258A31–A
Oct 2003
1X SCt 4812T BTS Optimization/ATP
J-16
Required Publications
The following publications are required to perform procedures in this
section:
S this manual
S Cellular System Administration – CDMA OnLine Documentation
S MWR1941 Wireless Mobile Edge Router Software Configuration
Guide; part number 78–13983–01
Preparation for Canned Configuration File TFTP
Transfer to CF Memory Card
Preparation for a canned configuration file tftp transfer consists of the
following activities:
1. Setting the LMF computer NIC IP address
2. Creating a directory (folder) on the LMF computer to be used for all
tftp file transfers
3. Installing the tftp server application on the LMF computer, and
setting the tftp server application root directory to the directory
created in 2, above
4. Connecting the LMF computer to the BTS router for both
HyperTerminal (serial) and Ethernet communication
5. BTS router power–up and initial configuration for Ethernet
communication
The following procedures are used to accomplish all of these preparatory
actions.
Set LMF computer NIC TCP/IP address and create the default
TFTP directory – Follow the procedure in Table J-4 to set the NIC IP
address.
NOTE
IMPORTANT! If the IP address for the LAN connection on an
LMF computer is being changed to support tftp downloads to a
BTS router, the BTS 10base–2 LAN IP address and subnet mask
for the NIC must be restored before the LMF can log into a BTS
to perform an optimization or ATP.
NOTE
There are differences between Windows 2000 and Windows 98 in
the menus and screens used for setting or changing a NIC
connection. In the following procedure, items applicable
to:Windows 2000 will be identified with Win2000Windows 98
will be identified with Win98
J